Tip In most situations, the drivers are installed after the hardware has been installed or connected to the computer. Installing drivers from a USB drive or floppy. Downloading and installing a driver. Installing a driver from an executable. Using the "have disk" option to install drivers. Install a driver using a. Tip If you have a CD with drivers, but the computer has no functioning disc drive, you can also download the drivers.
Tip If you have not yet downloaded the drivers, you can find drivers for your computer through the computer or device manufacturer. Tip If you're downloading drivers to install on another device, you can copy or extract the files to a USB flash drive and connect it to the other computer. Tip When extracting the drivers, remember where the folder containing the drivers is located since it needs to be known during the driver installation process. Note The executable may be packaged in a compressed file , which means before looking for the setup file, it needs to be uncompressed.
Installing a new device. Upgrading drivers for a pre-existing device. Note Make sure you install the correct. Additional information What hardware device drivers should be updated? How do I determine the version of a driver in Windows? How to roll back a Windows driver to the previous version.
Or you can go to network card manufacturer's website Step 3. Step 5. Install the network driver on the computer. Install Drivers with Driver Talent Without Internet If you need to install more than just network driver after a clean install of Windows system, you are suggested to install drivers without internet in a more intelligent way: using Driver Talent for Network Card opens new window.
Install all needed drivers on your PC at once , such as video card driver, audio driver, so that you don't need to install the missing drivers one by one after a fresh install, format, upgrade of Windows. Download opens new window Step 2. You can continue to use the program to install other drivers on your computer.
Use CD to install drivers. Determine your computer's USB port type. You should see a chunk of plastic in the upper half of this slot. USB 3. If your computer has both types of port, you're free to use whichever port you like depending on your USB flash drive type.
Figure out which type of flash drive you have. Look at the metal connector end of your flash drive: If the connector is rectangular and has a piece of plastic taking up part of the connector, you have a USB 3.
If the connector is oval and has no piece of plastic inside of it, you have a USB-C flash drive. Buy and attach an adapter if necessary. If the flash drive that you want to use is a USB 3. Plug your flash drive into your computer. If you're using a USB 3. USB-C flash drives can be inserted either way.
Part 2. Make sure your USB flash drive is plugged in. If your flash drive isn't plugged into your computer, plug it in before proceeding. This icon is used on wikiHow as fair use because it is being used to provide how-to instructions.
Copy your file. If you want to copy multiple files, hold down Ctrl while clicking each file you want to copy. Click your flash drive's name. It's in pane on the left-hand side of the File Explorer window, though you may first have to scroll down on the left side of the window. If you don't see your flash drive's name, click This PC near the top of the left-hand pane, then double-click your flash drive's name in the "Devices and drives" section.
Paste in the file s. You should see your copied file s appear in the File Explorer window. If you want to paste the file s inside of a specific folder inside of your flash drive, double-click the folder before pasting in the files. Eject the flash drive before removing it.
Remove the USB drive. After ejecting the drive, you can pull it out of your computer by gently tugging on it. Part 3. Open your flash drive. Click your flash drive's name in the lower-left side of the Finder window.
You'll find it under the "Devices" heading. Paste in your copied file s. You should see your copied file s appear in the Finder window. Part 4. Open the program you want to use. Create your file if necessary. If you're using the program to create a new file to save on your flash drive, create the file before proceeding. Skip this step if you just want to create a copy of the file on your flash drive. Open the "Save As" window.
Mac — Click File , then click Save As Name your document if necessary. If you want to add a different name to your file, type it into the "File name" Windows or the "Name" Mac text box.
Select your flash drive. Click your flash drive's name in the lower-left side of the window. Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article Steps. Related Articles. Article Summary. If the flash drive isn't already plugged in, you'll want to do that now so you don't accidentally save the downloaded file to your hard drive.
This should be the web browser you normally use. You'll find this setting in different areas in different web browsers, but by default, you should be prompted for each download.
If you've changed the download prompt before, you'll need to change it again. However, if you haven't changed this setting, you can skip this step.
0コメント